Dell G0N7D User Manual

Figure 13. Installing the front bezel
System feet
Removing the system feet
Prerequisites
1. Follow the safety guidelines listed in Safety instructions.
2. Place the system on its side on a flat, stable surface.
3. Rotate the system feet inward.
Steps
1. Using the Phillips 2 screwdriver, remove the screw that secures the foot to the base of the system.
2. Repeat the preceding step to remove the remaining system feet.
30
Installing and removing system components

Dell G0N7D Specifications

General

Brand	Dell
Model	G0N7D
Category	Server
Language	English