Dell G0N7D User Manual

Figure 76. Installing the internal USB card
Next steps
1. Follow the procedure listed in After working inside your system.
2. While booting, press F2 to enter System Setup and verify that the system detects the USB memory key.
Optional internal USB memory key
Removing the internal USB memory key
Prerequisites
CAUTION:
To avoid interference with other components in the server, the maximum permissible dimensions of
the USB memory key are 15.9 mm width x 57.15 mm length x 7.9 mm height.
1. Follow the safety guidelines listed in Safety instructions.
2. Follow the procedure that is listed in Before working inside your system.
Steps
Remove the USB memory key from the internal USB port.
Next steps
Replace the internal USB memory key.
Installing the internal USB memory key
Prerequisites
1. Follow the safety guidelines listed in Safety instructions.
2. Follow the procedure that is listed in Before working inside your system.
Installing and removing system components
87

Dell G0N7D Specifications

General

Brand	Dell
Model	G0N7D
Category	Server
Language	English