Dell POWERCONNECT 5548P User Manual

Dell PowerConnect 55xx Systems User Guide 327
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
Contax\CxUGSystemConfig.fm
DELL CONFIDENTIAL – PRELIMINARY 9/11/12 - FOR PROOF ONLY
Defining SNMPv3 Users Using CLI Commands
The following table summarizes the CLI commands for defining fields
displayed in the User Security Model pages.
The following is an example of the CLI commands:
SNMP Communities
When using SNMP v1,2, communities strings (passwords) are used to provide
access rights in the following ways:
• Basic Table — The access rights of a community can be read-only, read-
write, or SNMP Admin. In addition, you can restrict access to the
community to only certain MIB objects using a
view . Views are defined in
the
Views Setting pages.
•
Advanced Table — Access rights to a community are assigned to a group
that consists of users. A group can have Read, Write, and Notify access to
views. Groups are defined in the
Access Control pages.
Table 9-59. SNMP Users CLI Commands
CLI Command Description
snmp-server user username groupname
{v1|v2c|[remote-host] v3 [encrypted]
[auth {md5|sha} auth-password]}
no snmp-server user username [remote-
host]
Configures a new SNMP V3
user.
Use the no form of the
command to remove a user.
show snmp users [username] Displays the configuration of
users.
console(config)# snmp-server user tom acbd v1
console(config)#
snmp-server user tom acbd v2c
console(config)#
snmp-server user tom acbd v3

Dell POWERCONNECT 5548P Specifications

General

Brand	Dell
Model	POWERCONNECT 5548P
Category	Switch
Language	English