Dell POWERCONNECT 5548P User Manual

330 Dell PowerConnect 55xx Systems User Guide
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
Contax\CxUGSystemConfig.fm
DELL CONFIDENTIAL – PRELIMINARY 9/11/12 - FOR PROOF ONLY
– Group Name — Select the group to be associated with the
community.
Configuring Communities Using CLI Commands
The following table summarizes the CLI commands for setting fields in the
Community pages.
The following is an example of the CLI commands:
SNMP Notification Filters
Notification filters determine the type of SNMP notifications that are sent to
the management station, based on the OID of the notification to be sent.
Each OID is linked to a device feature or a feature aspect.
SNMP notification filters provide the following services:
• Identification of management trap targets
•Trap filtering
Table 9-60. SNMP Community CLI Commands
CLI Command Description
snmp-server community community
[view view-name] [ro|rw|su]
{ipv4-address|ipv6-address}
[mask mask-value|prefix-length
prefix-value] [type router|oob]
Sets up the community access string
to permit access to the SNMP
protocol.
Use the no form of this command to
remove the specified community
string
snmp-server community-group
community group-name [ipv4-
address|ipv6-
address][mask|prefix-length]
[type router|oob]
no snmp-server community string
[ipv4-address|ipv6-address]
Sets up community access string to
permit limited access to the SNMP
protocol, based on group access
rights.
show snmp Displays the current SNMP device
configuration.
console (config)# snmp-server community dell ro 10.1.1.1

Dell POWERCONNECT 5548P Specifications

General

Brand	Dell
Model	POWERCONNECT 5548P
Category	Switch
Language	English