Dell POWERCONNECT 5548P User Manual

Dell PowerConnect 55xx Systems User Guide 411
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
Contax\CxUGSwitching_Ports.fm
DELL CONFIDENTIAL – PRELIMINARY 9/11/12 - FOR PROOF ONLY
• Static — The ports comprise a single logical port for high-speed
connections between networking devices.
•
LACP — Link Aggregate Control Protocol. LACP-enabled LAGs
can exchange information with other links in order to update and
maintain LAG configurations automatically.
–
Description (0 - 64 Characters) — Enter a user-defined description of
the configured LAG.
–
LAG Type — Displays the port types that comprise the LAG.
–
Admin Status — Enable/disable the selected LAG.
–
Current Status — Displays the LAG is currently operating.
–
Admin Speed — Select the configured speed at which the LAG is
operating. The possible options are:
•
10M — The LAG is currently operating at 10 Mbps.
•
100M — The LAG is currently operating at 100 Mbps.
•
1000M — The LAG is currently operating at 1000 Mbps.
•
10000 Full — The LAG is currently operating at 1000 Mbps.
–
Current Speed — Displays the speed at which the LAG is currently
operating.
–
Admin Auto Negotiation — Enable/disable auto-negotiation, which is
a protocol between two link partners that enables a LAG to advertise
its transmission rate, duplex mode and flow control abilities to its
partner.
–
Current Auto Negotiation — Displays the current auto-negotiation
setting.
–
Admin Advertisement — If auto-negotiation is enabled, select the
auto-negotiation setting the LAG advertises. The possible options are:
•
Max Capability — All LAG speeds and Duplex mode settings are
accepted.
•
10 Full — The LAG advertises for a 10 mbps speed LAG and full
duplex mode setting.
•
100 Full — The LAG advertises for a 100 mbps speed LAG and
full duplex mode setting.

Dell POWERCONNECT 5548P Specifications

General

Brand	Dell
Model	POWERCONNECT 5548P
Category	Switch
Language	English