Dell POWERCONNECT 5548P User Manual

484 Dell PowerConnect 55xx Systems User Guide
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
Contax\CxUGSwitching_VLAN.fm
DELL CONFIDENTIAL – PRELIMINARY 9/11/12 - FOR PROOF ONLY
– Frame Type — Packet type accepted by the LAG. The possible options
are:
•
Admit All — Tagged and untagged packets are both accepted by
the LAG.
•
Admit Tag Only — Only tagged packets are accepted by the LAG.
•
Admit Untagged Only — Only untagged packets are accepted on
the LAG.
–
Ingress Filtering — Enable/disable Ingress filtering by the LAG.
Ingress filtering discards packets that are destined to VLANs of which
the specific LAG is not a member.
–
Native VLAN ID (1-4094) — Enter VLAN used for untagged traffic
to trunk ports, or select
None .
–
Multicast VLAN ID (1-4094) — Enter VLAN used for Multicast TV
VLAN traffic on access ports, or select
None .
–
Customer VLAN ID (1-4094) — Enter VLAN used for customer
ports, or select
None .
Assigning LAGs to VLAN Groups Using CLI Commands
Refer to Table 14-2 for a list of the LAG to VLAN CLI commands.

Dell POWERCONNECT 5548P Specifications

General

Brand	Dell
Model	POWERCONNECT 5548P
Category	Switch
Language	English