Chapter 12 Description of Parameter SettingsME300
-
-
00Axh: kg/m
00Bxh: kg/h
00Cxh: lb/s
00Dxh: lb/m
00Exh: lb/h
00Fxh: ft/s
010xh: ft/m
011xh: M
012xh: ft
013xh: degC
014xh: degF
015xh: mbar
016xh: bar
017xh: Pa
018xh: kPa
019xh: mWG
01Axh: inWG
01Bxh: ftWG
01Cxh: Psi
01Dxh: Atm
01Exh: L/s
01Fxh: L/m
020xh: L/h
021xh: m3/s
022xh: m3/h
023xh: GPM
024xh: CFM
bit 0–3: the control frequency F page, user-defined unit (Pr.00-04 = d10, PID feedback value) and
the number of decimal places (Pr.00-26) which supports up to three decimal places.
bit 4–15: the control frequency F page, user-defined unit (Pr.00-04 = d10, PID feedback value)
and the displayed units for Pr.00-26.
You must convert the setting value to decimal when using the keypad to set parameters.
To Next Page
Loading...
Need help?
General