Denon AVR-4308 User Manual

0
Getting Started Connections Setup Remote Control Multi-Zone Information Troubleshooting
ENGLISH
Playing Files Stored on USB Memory
Devices
Only USB memory devices conforming to mass storage
class and MTP (Media Transfer Protocol) standards can be
played on the AVR-4308.
Basic Operation
1
Make the necessary preparations.
• Set the USB port to be used.
1
• Set the USB port to be used.
: “Source Select” – “NET/USB” –
“Playback Mode” – “USB Select” (vpage 41)
• Connect the USB memory device to the set USB port.
2
Use ui to select “USB”, then press ENTER or p.
3
Use ui to select the search item or folder, then press
ENTER or p.
4
Use ui to select the fi le, then press ENTER or p.
Playback starts once buffering reaches “100%”.
Playing fi les that have been Preset or Registered in
Your Favorites
Files can be preset, registered in your favorites and played using the
same operations as for Internet radio stations.
NOTE
• Presettings are erased by overwriting them.
• When the operation described below is performed, the music
server’s database is updated and it may no longer be possible to play
preset or favorite music fi les.
• When you quit the music server and then restart it.
• When music fi les are deleted or added on the music server.
• By default, the front panel’s USB port will be used.
• Depending on the size of the still picture (JPEG) fi le, some time may
be required for the fi le to be displayed.
Playing Files Stored on a Computer
Use this procedure to play music fi les, image fi les or
playlists.
1
Use ui to select the host name of the computer on
which the music fi le you want to play is located, then
press ENTER or p.
2
Use ui to select the search item or folder, then press
ENTER or p.
3
Use ui to select the fi le, then press ENTER or p.
Playback starts once buffering reaches “100%”.
• When playing still picture (JPEG) fi les, fi les can also be selected
using the operation described below.
During playback, either press [d] (previous fi le) or [f] (next fi le).
• Connections to the required system and specifi c settings must be
made in order to play music fi les (vpage 21).
• Before starting, you must launch the computer’s server software
and set the fi les as server contents. For details, see the operating
instructions of your server software.
• Depending on the size of the still picture (JPEG) fi le, some time may
be required for the fi le to be displayed.
Selecting tracks
During playback, either press u (previous track) or i (next track).
ENTER uip
INPUT MODE
uip
ENTER
[df]
[ NET/
DTU]
About the button names in these explanations
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only:
Buttons on the main unit and remote control unit
Playback
Surround mode
INPUT
MODE
Surround
mode
[USB]
[REPEAT]
[RANDOM]
(Main remote control unit)
(Sub remote control unit)
( mode)
1.AVR4308E2_ENG_3.indd 60 2007/10/26 11:42:53

Denon AVR-4308 Specifications

General

Brand	Denon
Model	AVR-4308
Category	Stereo Receiver
Language	English