Digi Connect SP User Manual

Digi Connect and ConnectPort TS Family features
This section provides an overview of Digi Connect and ConnectPort TS Family features.
User interfaces
You can use the following user interfaces to configure, monitor, and administer Digi devices:
n Digi Remote Manager
n Web-based interface
n Command-line interface available via local serial port, telnet or SSH
n Remote Command Interface (RCI) over the serial port
n Simple Network Management Protocol (SNMP)
Network services
You can enable or disable access to network services. This means that you can restrict a device’s use
of network services to those strictly needed by the device. To improve device security, you can disable
non-secure services. You can enable or disable the following network services:
n Advanced Digi Discovery Protocol (ADDP)
n RealPort
n Encrypted RealPort
n HTTP/HTTPS
n Line Printer Daemon (LPD)
n Remote login (rlogin)
n Remote shell (rsh)
n SNMP
n Telnet
n Socket connectivity to the serial ports (for example, reverse telnet, reverse SSH, raw socket,
and UDP)
You can enable or disable access to network services from the Network ServicesSettings page in the
web interface. For more information, see Network Services Settings.
You can use the set service command to enable and disable network services from the command-line
interface. See the Digi Connect® Family Command Reference on www.digi.com for a description of the
set service command.
Digi Connect Family and ConnectPort TS Family
10

Digi Connect SP Specifications

General

Brand	Digi
Model	Connect SP
Category	Server
Language	English