Digi Connect SP User Manual

Digi Connect and ConnectPort TS Family features Configuration management
Digi Connect Family and ConnectPort TS Family
16
n Wireless Digi Connect products provide Wi-Fi Protected Access (WPA/WPA2—/802.11i) and
Wired Equivalent Privacy (WEP) encryption (64-/128-bit). Supported WPA/WPA2—/802.11i
authentication methods include:
Supported WPA authentication methods
EAP-TLS PEAP EAP/TTLS
LEAP
(WEP only)
EAP-PEAP/MSCHAPv2 (both PEAPv0 and
PEAPv1)
EAP-PEAP/TLS (both PEAPv0 and PEAPv1)
EAP-PEAP/GTC (both PEAPv0 and PEAPv1)
EAP-PEAP/OTP (both PEAPv0 and PEAPv1)
EAP-PEAP/MD5-Challenge (both PEAPv0 and
PEAPv1)
EAP-TTLS/EAP-MD5-
Challenge
EAP-TTLS/EAP-GTC
EAP-TTLS/EAP-OTP
EAP-TTLS/EAP-MSCHAPv2
EAP-TTLS/EAP-TLS
EAP-TTLS/MSCHAPv2
EAP-TTLS/MSCHAP
EAP-TTLS/PAP
EAP-TTLS/CHAP
SNMP security
You can configure SNMP set commands to use SNMP read-only. Digi recommends changing the public
and private community names to prevent unauthorized access to the Digi device.
Configuration management
Once a Digi Connect and ConnectPort TS Family device is configured and running, you may need to
periodically perform the following configuration-management tasks:
n Copy configurations to and from a remote host
n Perform the following on the Digi device:
l Update the firmware
l Reset the factory settings
l Manage the device files and memory
l Reboot the device
For more information on these configuration-management tasks, see Administration.
Customization capabilities
You can customize several aspects of Digi devices. For example, you can:

Digi Connect SP Specifications

General

Brand	Digi
Model	Connect SP
Category	Server
Language	English