Digi Connect SP User Manual

Digi Connect and ConnectPort TS Family command-line
interface
Management through the command line
interface
Digi Connect Family and ConnectPort TS Family
120
set buffer and display buffers
Use the set buffer command to configure buffering parameters on a port and display the current port
buffer configuration. The display buffers command displays the contents of a port buffer, or
transfers the port-buffer contents to a server running Trivial File Transfer Protocol (TFTP).
set forward
Use the set forward command to configure IP forwarding.
set gpio
Use the set gpio to display current GPIO pin settings. You can reconfigure the pin settings as needed.
set group
Use the set group command to configure create, establish, update, or remove group attributes.
set host
Use the set host command to configure the host name for the Digi device.
set mgmtconnection
Use the set mgmtnetwork command to configure the Remote Manager connection settings.
set mgmtglobal
Use the set mgmtglobal command to configure the Remote Manager global settings.
set mgmtnetwork
Use the set mgmtnetwork command to configure the Remote Manager network settings.
set network
Use the set network command to configure the network options.
set permissions
Use the set permissions command to configure the user permissions for various services and
command-line interface commands.
set pmodem
Use the set pmodem command to configure the modem emulation.
set pppoutbound
Use the set pppoutbound command to configure the PPP outbound connections.

Digi Connect SP Specifications

General

Brand	Digi
Model	Connect SP
Category	Server
Language	English