Digi Connect SP User Manual

Digi Connect and ConnectPort TS Family features Network connections and data paths
Digi Connect Family and ConnectPort TS Family
19
n Raw TCP connection: The Digi Connect and ConnectPort TS Family initiates a raw TCP socket
connection to a remote entity.
n Telnet connection: The Digi Connect and ConnectPort TS Family initiates a TCP connection
using the telnet protocol to a remote entity.
n Raw TLS encrypted connection: The Digi Connect and ConnectPort TS Family initiates an
encrypted raw TCP socket connection to a remote entity.
n Rlogin connection: The Digi Connect and ConnectPort TS Family initiates a TCP connection
using the rlogin protocol to a remote entity.
Command-line interface (CLI)-based client connections
CLI-based client connections are available for use when you establish a session with the Digi Connect
and ConnectPort TS Family product’s CLI. CLI-based client connections include:
n ssh: Allows you to connect to a remote entity using the ssh protocol.
n telnet: Allows you to connect to a remote entity using the telnet protocol.
n rlogin: Allows you to connect to remote entity using the rlogin protocol (bash only).
n scp: Allows you to transfer files (bash only).
n connect: Begin communicating with a local serial port.
Note Additional communication methods include using a bash shell such as scp, tftp, nc, or using
Python.
Modem emulation (pseudo-modem) client connections
When a port is in the modem-emulation or pseudo-modem mode, it can initiate network connections
based on AT command strings received on the serial port. See the Digi Connect® Family Command
Reference on www.digi.com for modem emulation AT commands.

Digi Connect SP Specifications

General

Brand	Digi
Model	Connect SP
Category	Server
Language	English