Digi Connect and ConnectPort TS Family web interface Configuration through the web interface
Digi Connect Family and ConnectPort TS Family
84
3. Click User Access.
4. Enable or disable the device interface access as desired:
n Allow command line access: Enables or disables access to the command line.
n Allow web interface access: Enables or disables access to the web interface.
5. Click Apply. The changes take effect immediately. No logout/login is necessary.
User permissions settings
Use the User Permissions page to define whether and how users can use services and configuration
settings for the Digi Connect and ConnectPort TS Family product. For example, you can disable a
user’s access to certain parts of the web interface, or allow them to display settings only but not
change them.
The list of services and the user permissions available for them vary by Digi Connect and ConnectPort
TS Family product and the features supported in the product. There are several groups of services,
such as Network Configuration, Serial Configuration, System Configuration, Command Line
Applications, and System Administration, with user permissions for various features.
User permissions and effects
Permission Setting Effect
None The user does not have permission to execute this setting.
Read Self The user can display their own settings, but cannot display settings for
other users.
Read The user can read the settings for all users, but does not have permission
to modify or write the settings.
Read/Write Self The user can read and write their own settings, but does not have
permission to modify or write the settings for other users.
Read All/Write Self The user can read the settings for all users and can modify their own
settings.
Read/Write The user has full permission to read and write the settings for all users.
Execute The user has full permission to execute the settings.
Restrictions on setting user permissions
A user cannot set another user's permission level higher than their own permission level, nor can a
user raise their own permission level.
Set user permissions
To set user permissions, choose one of the following options:
n Set user permissions from the web interface:
1. Select Configuration >Users.
2. Click a user under User Name.
3. Click User Permissions.
To Next Page
Loading...
Need help?
General