16
Section 3 - Programming
Using the Function buttons The RP-12 has three Function keys. They are located in the bottom
row of the Effects Access buttons and they share buttons with the
<MOD>, <MIX>, and <MORE> options. Each Function key is num-
bered and performs several functions in the Utility and MIDI modes
(depending on the selected menu screen). These buttons are also
used in the Program naming process (see Storing/Naming on page
19). See pg. 49 for more on the Utility Button. See pg. 58 for more on
the MIDI Button.
¡™& £ are used in the display to indicate which func-
tion key to use.
More Special Characters There are several special characters that the RP-12 uses to tell you at
a glance exactly what it is doing. Some special characters in the RP-12
are in inverted type, that is, reversed out of a black background, and
they will usually appear in the upper right-hand corner of the Program
Title screen.
ß Indicates that the Cabinet Emulator is currently active.
Ç Indicates that a MIDI continuous controller is linked to the
Parameter.
å∫Characters from this group are used for distinguishing
between Modules of the same name in a single Algorithm. This is an
instance in which a special character will immediately follow the
Module name, rather than appear in the corner of the display.
* Indicates a Program has been modified.
( ) Indicates the value within the brackets is a stored or
saved value.
Section 3 - Programming
RP-12 Owner’s Manual
To Next Page
Loading...
Need help?
General
