21
• When the Program name appears as you want it, press the
<NAME> button to exit the name selection mode.
Storing Programs Once you have dialed in the program how you want it and given it a
name, press the <STORE> button. The display reads:
This screen allows you to select the Program location in which you
want to store the new Program.
• Using the <UP> and <DOWN> Program buttons, scroll to the
Program number location in which you want to store the new
Program.
• To store the Program in the selected location, press the
<STORE> key again. The display briefly reads:
after which you will automatically be returned to the previous
mode. To abort the command, press <COMPARE>.
The Store function can also be used to copy Programs from one mem-
ory location to another. If no changes have been made to the selected
Program and the <STORE> button is pressed, the display reads:
Select the memory location in which you want to place a copy of the
selected Program using the <UP> and <DOWN> Program buttons, and
press <STORE> again. The display briefly reads:
after which you will automatically be returned to the previous mode.
To abort the command and return to the Program, press the <COM-
PARE> button.
***Copying***
Copy To Prg ##
[PROGRAM NAME]
***Storing***
Store To Prg ##
[PROGRAM NAME]
Section 3 - Programming
RP-12 Owner’s Manual
To Next Page
Loading...
Need help?
General
