DigiTech RP12 User Manual

51
CC Pedal This section allows you to assign the CC Pedal’s CC number and
transmit Channel number.
• From Program mode, press the <UTILITY> button once.
• Press the Function button <MOD ¡> once. The display reads:
Assign CC Pedal
• Press Function button <MIX ™>. The display reads:
•Press Function button <MOD ¡>. The display reads:
The cursor should be under the CC number in the display. Function
button <MOD ¡> selects the CC link number for the CC Pedal.
Function button <MIX ™> selects the MIDI Transmit Channel for the
CC Pedal. If you press the <RIGHT> Parameter button, the display
reads:
On this screen, Function button <MOD ¡> selects the MIDI Transmit
Channel for the Toggle CC’s.
Calibrating the CC Pedal
• From Program mode, press the <UTILITY> button once.
• Press the Function button <MOD ¡> once. The display reads:
• Press Function button <MIX ™>. The display reads:
¡Pedals ™CC Ped
£PrgList Assign≥
¡Toggle Transmit
≤ Channel 1
¡CCPedal:CC 4
™Transmit:Ch 1 ≥
¡Assign CC Pedal
™Calibrate Pedal
¡Pedals ™CC Ped
£PrgList Assign≥
Section 6 - Pedalboard Set-Up
RP-12 Owner’s Manual

DigiTech RP12 Specifications

General

Brand	DigiTech
Model	RP12
Category	Music Pedal
Language	English