DigiTech RP360 XP User Manual

39
RP360 / RP360 XP
FS3X Operation
(CONTROL IN Set To “FS3X”, FOOTSWITCH MODE Set To “BANK”)
When the “FS3X” CONTROL IN option is selected and the “BANK” FOOTSWITCH MODE option
is selected, the FS3X Footswitch can be used for full-time control of preset bank navigation and the
Looper� The below diagram shows the available functions�
Preset Bank Down
Press to navigate down
through preset banks�
Preset Bank Up
Press to navigate up
through preset banks�
Arm Loop Recording
Press once to arm the Looper for recording�
Record Loop
Once armed, start playing or press again to
start loop recording� When done recording,
press once more to set the loop end point�
Record Overdub Loop
When a loop is recorded and playing back,
press once to start overdub recording� Press
again to stop overdub recording�
Stop Loop Playback
When a loop is recorded and playing, press
twice quickly to stop loop playback�
Play Loop
When a loop is recorded and playback is
stopped, press once to start loop playback�
Clear Loop
When a loop is recorded and playback is
stopped, press and hold to clear loop�

DigiTech RP360 XP Specifications

General

Brand	DigiTech
Model	RP360 XP
Category	Music Pedal
Language	English