DigiTech RP360 XP User Manual

67
RP360 / RP360 XP
Compression
CMP
A compressor is used to increase sustain and beef up your tone� It does this by raising lower level
signals and restricting louder ones� The following provides a description of the compressor models
available in the RP and their associated parameters�
COMPRESSOR MODELS
• Main Squeeze
(DigiTech Compressor)
The DigiTech Main Squeeze compressor compresses high-input signals while boosting low-
input signals, giving you smooth and long sustain without degrading the quality of the original
sound� It also has a control to adjust the tone of the compressed signal�
Parameters
NAME
OPTIONS OR
RANGE
DESCRIPTION
ON/BYP ON, BYPASS Turns the effect on and off�
LEVEL 0 - 99 Adjusts the output level of the effect�
SUSTAIN 0 - 99
Adjusts the amount of compression� Higher values equal more
compression�
TONE 0 - 99 Adjusts the tone of the effect, after compression has been applied�
ATTACK 0 - 99
Adjusts the time that it takes the compressor to react and apply
compression� Higher values allow more of the initial attack of the signal
through before compression kicks in�
•
Blue Compressor
(Based on a Boss
®
CS-2 Compressor/Sustainer)
The CS-2 compresses high-input signals while boosting low-input signals, giving you smooth
and long sustain without degrading the quality of the original sound�
Parameters
NAME
OPTIONS OR
RANGE
DESCRIPTION
ON/BYP ON, BYPASS Turns the effect on and off�
LEVEL 0 - 99 Adjusts the output level of the effect�
SUSTAIN 0 - 99
Adjusts the amount of compression� Higher values equal more
compression�
ATTACK 0 - 99
Adjusts the time that it takes the compressor to react and apply
compression� Higher values allow more of the initial attack of the signal
through before compression kicks in�

DigiTech RP360 XP Specifications

General

Brand	DigiTech
Model	RP360 XP
Category	Music Pedal
Language	English