70
RP360 / RP360 XP
DELAY MODELS
• DM Delay
(Based on a Boss
®
DM-2 Analog Delay)
The DM-2 is a classic and standard BBD analog delay that used 4,096 stages of delay�
The frequency response and noise depended upon the delay time� The signal increasingly
deteriorates with each repeat, so as the repeats are turned up, the signal becomes less and less
recognizable and actually becomes more of an effect than a delay�
Parameters
NAME OPTIONS OR RANGE DESCRIPTION
ON/BYP ON, BYPASS Turns the effect on and off�
REPEATS 0�024 - 0�310 SEC Sets the delay time�
INTENSITY 0 - 99
Sets how many delay repeats will occur� The lowest value equals one
repeat� Higher values equal more repeats�
ECHO 0 - 99 Adjusts the output level of the effect�
•
Digital Delay
A digital delay can be called a perfect representation of your guitar’s signal� Desired for their
brilliant qualities, digital delays have virtually no noise and a full frequency response�
Parameters
NAME OPTIONS OR RANGE DESCRIPTION
ON/BYP ON, BYPASS Turns the effect on and off�
TIME 0 - 5�000 SEC Sets the delay time�
REPEATS 0 - 99, HOLD
Sets how many delay repeats will occur� The lowest value equals one
repeat� Higher values equal more repeats and the highest value equals
repeat hold (infinite repeats)�
LEVEL 0 - 99 Adjusts the output level of the effect�
TAP DIV
3 QUARTER,
EIGHT, DOT EIGHT,
QUARTER, HALF
Sets the delay tap divider rate or the note value at which the delay will
occur�
DUCKTHRSH 0 - 99
Adds an additional ducking effect to the delayed signal� This parameter
adjusts the ducking effect’s threshold� Lower values increase the effect
and higher values decrease the effect�
DUCKLEVEL 0 - 99 Adjusts the output level of the ducking effect�
To Next Page
Loading...
Need help?
General
