114
RP360 / RP360 XP
SPECIFICATIONS
General Specications
A/D/A Converter: 24-bit high performance audio
Sampling Frequency: 44�1 kHz
DSP Section: AudioDNA2
™
DSP Processor
Simultaneous Effects: 10
Preset Memory: 99 User Presets/99 Factory Presets
Phrase Looper: 40 seconds of record time
Drum Machine: 60 Patterns
Analog Input Connections
Guitar Input: 1/4˝ Unbalanced (TS)
Input Impedance: 1 MOhm
Maximum Input: +10 dBu
Aux Input: 1/8˝ Stereo (TRS)
Analog Output Connections
1/4˝ Outputs
Left/Right Outputs: 1/4˝ Impedance Unbalanced
Left/Right Output Impedance: 500 Ohms per side
Maximum Output: +8�5 dBu
Headphone Output: 1/8˝ Stereo (TRS) – 118 mW per channel @ 50 Ohms
Optimized for use with headphones having an impedance of 60
Ohms or less
Digital Connections
Universal Serial Bus (USB): Type B, supports USB 1�1 Full Speed (12 Mbps Bandwidth USB
2�0 compatible)
RP360/RP360XP USB Recording Specications
Sample Rate: 44�1 kHz
Bit Depth: Supports 16-bit or 24-bit (depends on setup in recording
software)
Physical
Dimensions: RP360: 7�5” (L) x 8�5” (W) x 2” (H)
RP360XP: 11�5” (L) x 8�5” (W) x 2” (H)
Unit Weight: RP360: 2�84 lbs�
RP360XP: 4�12 lbs�
Power
Power Requirements: 9 VDC, 300mA, 2�7 W, center pin GND, outer sleeve positive
Power Adapter: PS0913DC-01 (US, JA, EU)
PS0913DC-02 (AU, UK)
Product specifications subject to change without notice�
To Next Page
Loading...
Need help?
General
