DigiTech RP360 User Manual

51
RP360 / RP360 XP
Phrase Sampler
This system parameter determines how the built-
in phrase sampler will be used and provides two
options: SOUND CHECK and LOOPER�
Plexi-Drive 1
LOOPER READY
SYSTEM SETTINGS 3/4
CONTROL
IN
PHRASE
SAMPLER
FS3X
LOOPER
EXP/VOL
EXP/TRS SOUND
CHECK
LOOPER
• SOUND CHECK
Selecting this option places the phrase sampler at the beginning of the effects chain for Sound
Check use� See Sound Check on page 29 for information on using the Sound Check feature�
• LOOPER
Selecting this option places the phrase sampler at the end of the effects chain for Looper use�
This is the default setting� See Looper on page 28 for information on using the Looper�
To edit the PHRASE SAMPLER option:
1�
Press the SYSTEM button�
2� Press either the SELECT knob or SYSTEM button repeatedly until the LCD display reads 3/4 in
the upper right-hand corner of the LCD display�
3� Turn the EDIT 3 (PHRASE SAMPLER) knob to select the desired option�
4� Press the BACK button or any FOOTSWITCH to exit the System Settings menu and return to
the Performance state�

DigiTech RP360 Specifications

General

Brand	DigiTech
Model	RP360
Category	Music Pedal
Language	English