Page 103
Updates
Updates
Your satellite receiver is set to turn itself off at 3:00 a.m. so that it can receive
updates to the
Program Guide. To change the update time, complete the
following:
1. Press the MENU button.
2. Press 8 to open Preferences.
3. Press 4 to open the Updates screen.
4. Highlight the Activation option.
5. Use the UP and DOWN ARROW buttons to select
Enable or Disable.
Note: If you disable this feature, no new Program Guide information will
be available until the receiver is turned off.
6. Highlight the
Time Set option.
7. Use the NUMBER PAD buttons or the UP and DOWN ARROW buttons
to set the time.
8. Highlight the
AM/PM option.
9. Use the UP and DOWN ARROW buttons to select
AM or PM.
10. Select
Done to save the changes and exit this screen.
Note: You can reset the changes you have made to the Updates feature by
selecting
Defaults before exiting this screen.
To Next Page
Loading...
Need help?
General
