Dish Network Receiver User Manual

Chapter 3
Page 112
Using the System
Control a Tuner or Amplifier
Only the buttons described here control a tuner or audio amplifier. Some of the
buttons described here may not control your tuner or amplifier. Please see the
user manual that came with your tuner or amplifier for more information.
AUX Mode Button
You must first set up the remote to control the device. See Set Up the Remote to
Control Devices, beginning on page 104. Then, you must press the AUX mode
button to set the remote to AUX mode. The AUX mode button flashes once to
show you’ve set the remote to AUX mode. Make sure you keep the remote in
AUX mode to control the device using the buttons described here.
Power Button
Press the blank POWER button to turn the tuner or audio amplifier on or off.
Mute Button
Press the MUTE button to turn the sound off or on.
Volume Button
Press the VOLUME button to raise (+) or lower (-) the audio volume.
Up and Down Arrow Buttons
Use UP and DOWN ARROW buttons to change channels on a tuner or audio
receiver.
Select Button
The SELECT button works as the INPUT SELECT button for the tuner or
audio amplifier/receiver.

Dish Network Receiver Specifications

General

Brand	Dish Network
Model	Receiver
Category	Receiver
Language	English