Dish Network Receiver User Manual

Chapter 3
Page 90
Using the System
3. At the Search History screen, you have the following options:
•
Search—Select one of the items and then select Search.
•
Edit—Select one of the items and then select Edit to make changes.
•
Delete—Select one of the items and then select Delete.
•
Delete All—Select Delete All to clear the Search History.
Using Locks
When you unlock programming delivered by the TV2 outputs
to your in-home cabling system, you are allowing all TVs
connected to your in-home cabling system to have access to
this programming. In this case, you must rely on the V-Chip
technology and settings in the individual TVs to prevent
viewing of inappropriate programming. Consult your TV user
guides for instructions to set up V-Chip protection.
Note: Locks for programming on the TV1 outputs for the nearby TV are set
using the
TV1 menus. Locks for programming on the TV2 outputs to remote
TVs are set using the
TV2 menus. The section below applies to locks set by
either
TV1 or TV2 menus. Locks set for TV1 programming are separate from
locks set for
TV2 programming.
How to Set Locks: A Two-Step Process
1. Create the locks that you want.
2. Lock the receiver.
When the receiver is locked, anyone who wants to access locked items must
enter the password.
When You Have Locked the Receiver
• If you try to access a locked item or open the Locks menu, the receiver
displays a message prompting you to enter the password.
• The receiver allows you three tries to enter the correct password. If you fail
to enter the correct password, the receiver does not allow more tries for
several minutes.
• If you enter the correct password, you can access the locked item or open
the
Locks menu.
• If you exit a locked item or close the Locks menu, you must enter the
password to access the item.

Dish Network Receiver Specifications

General

Brand	Dish Network
Model	Receiver
Category	Receiver
Language	English