2-7
11C-M12M0-0004-0
1-22. Conveyance Clutch
Electromagnetic clutch for transmitting the conveyance force to the stapling/folding stopper section. Uses a DC +24 V
power.
1-23. Total Counter
Electromagnetic counter. Uses a DC +24 V power. Counts up with each stapling/folding or folding operation.
1-24. Staple Home Sensor
Sensor for detecting the home position of the stapler. Uses a photointerrupter.
1-25. Movable Table Home Sensor
Sensor for detecting the home position of the machine moving mechanism (Movable table). Uses a photointerrupter.
1-26. Knife Home Sensor
Sensor for detecting the home position of the folding knife. Uses a photointerrupter.
1-27. Staple Index Sensor
Uses a photointerrupter. When the staple motor rotates and the notch of the index plate attached to the motor shaft
passes by the sensor, the sensor outputs pulses at a fixed cycle.
Used for detecting the rotation of the staple motor.
1-28. Knife Index Sensor
Uses a photointerrupter. When the knife motor rotates and the notch of the index plate attached to the motor shaft
passes by the sensor, the sensor outputs pulses at a fixed cycle.
Used for detecting the rotation of the knife motor.
1-29. Folding Conveyance Index Sensor
Uses a photointerrupter. When the folding conveyance motor rotates and the notch of the index plate attached to the
motor shaft passes by the sensor, the sensor outputs pulses at a fixed cycle.
Used for detecting the rotation of the folding conveyance motor.
1-30. Conveyance Index Sensor
Uses a photointerrupter. When the conveyance motor rotates and the notch of the index plate passes by the sensor,
the sensor outputs pulses at a fixed cycle.
Used for detecting the rotation of the conveyance motor.
1-31. Option Sensor
Sensor for detecting the optional guides. Uses a photointerrupter.
1-32. Back Unit Home Sensor
Sensor for detecting the home position of the back jogger unit. Uses a photointerrupter.
To Next Page
Loading...
Need help?
General
