Order number
Serial number
Medical device
Health Industry Bar Code (HIBC)
Manufacturer
1.2 Copyright information
All circuits, processes, names, software pro-
grams and units mentioned in this document are
protected by copyright.
The Installation and Operating Instructions must
not be copied or reprinted, neither in full nor in
part, without written authorisation from Dürr Den-
tal.
2 Safety
Dürr Dental has designed and constructed this
unit so that when used properly and for the inten-
ded purpose it does not pose any danger to
people or property.
Despite this, the following residual risks can
remain:
– Personal injury due to incorrect use/misuse
– Personal injury due to mechanical effects
– Personal injury due to electric shock
– Personal injury due to radiation
– Personal injury due to fire
– Personal injury due to thermal effects on skin
– Personal injury due to lack of hygiene, e.g.
infection
2.1 Intended purpose
The amalgam separator is designed for the sepa-
ration of amalgam out of all waste water collec-
ted from dental treatment units.
2.2 Intended use
The amalgam separator is designed for installa-
tion downstream of an air/water separation sys-
tem.
Service, maintenance, recurring tests and clean-
ing must be performed in accordance with the
manufacturer's specifications.
The permissible flow rate must be observed.
The disposable amalgam containers must only
be used once.
2.3 Improper use
Any use of this appliance / these appliances
above and beyond that described in the Installa-
tion and Operating Instructions is deemed to be
incorrect usage. The manufacturer cannot be
held liable for any damage resulting from incor-
rect usage. The operator will be held liable and
bears all risks.
This includes:
Important information
4 9000-606-44/30 2011V003
EN