dynabook TECRA A50-J Series User Manual

Maintenance Manual (960-946) 4-19
Replacement Procedures
4.17 3G module
4.17.1 Removing the 3G module
To remove the 3G module, follow the steps below and refer to Figure 4-18.
1. Peel off the INSU SQUARE.
2. Disconnect the 3G ANTENNA cables from the connectors on the 3G
MODULE. (red tube from “MAIN”)
3. Remove the following screw and disconnect the 3G MODULE from the
connector CN2610 on the USB board (FMERLT*).
Figure 4-18 Removing the 3G module
4.17.2 Installing the 3G module
To install the 3G module, follow the steps below.
1. Insert the 3G MODULE to the connector CN2610 on the USB board.
Secure the 3G MODULE with the screw.
2. Connect the 3G ANTENNA cables to the connectors on the 3G
MODULE. (red tube to “MAIN”)
3. Stick a new INSU SQUARE in place.
S2 x 2.3CT
AUX
Main
3G Module
CN2630

dynabook TECRA A50-J Series Specifications

General

Brand	dynabook
Model	TECRA A50-J Series
Category	Laptop
Language	English