Eaton E Series User Manual

3.4 Entering a Password
Most activities require you to enter a prede󰊟ned password. Several access-levels exist, and
each of these can be given a speci󰊟c “access-level password”. (See the Technical Manual for
details.) The factory default for all access-level passwords is “1234”.
Operational
Info
Ack/Rst
Ok
CTRL
E_FA8
Enter Password
Supervisor-Lv3
*
* * *
1 2 3 4
Password Entry:
Each Softkey is now labeled with a digit in the
range 1…4.
Use the Softkeys to enter the required
password. On the display, every typed-in digit
is represented by an asterisk “*”.
Finally press the »OK« key.
If, however, it is preferred to change parameters without entering a password, it is
possible to de󰊟ne a blank password for the respective access level. But be aware that
this can be a potential security risk.
36 www.eaton.com E-Series Family Quick Start Guide
3 Quick Start – Operation via Panel
3.4 Entering a Password

Eaton E Series Specifications

General

Brand	Eaton
Model	E Series
Category	Relays
Language	English