EMC Connectrix B Series Reference Manual

2
Installing Through Telnet
2-3
Installing Fabric Watch
Installing Through Telnet
To install Fabric Watch using Telnet commands:
1. Log on to the switch by Telnet (refer to the appropriate EMC
Connectrix Fabric OS Reference Manual for details), using an
account that has administrative privileges.
2. To determine whether a Fabric Watch license is already installed
on the switch, type
licenseShow on the Telnet command line.
A list displays all the licenses currently installed on the switch.
If the Fabric Watch license is not included in the list or is incorrect,
continue with step 3.
3. Enter the following on the command line:
licenseAdd key
where key is the license key provided to you, surrounded by
double quotes. The license key is case sensitive and must be
entered exactly as given.
4. Verify the license was added by entering the following on the
command line:
licenseShow
If the license is not listed, repeat step 3.

EMC Connectrix B Series Specifications

General

Brand	EMC
Model	Connectrix B Series
Category	Switch
Language	English