Contents
Chapter 1 Planning..................................................................................................................................... 5
1.1 About this document.................................................................................................................. 5
1.2 Hazard messages........................................................................................................................ 5
1.3 Related documentation.............................................................................................................. 5
1.4 Meter components......................................................................................................................6
1.5 Installation types......................................................................................................................... 6
1.6 Installation checklist....................................................................................................................9
1.7 Maximum cable lengths between sensor and transmitter..................................................10
Chapter 2 Mounting and sensor wiring................................................................................................. 11
2.1 Mounting and sensor wiring for integral-mount transmitters........................................... 11
2.2 Mount the transmitter to a wall or instrument pole.............................................................11
2.3 Wire the 9-wire remote-mount transmitter to the sensor...................................................16
2.4 Ground the meter components...............................................................................................18
2.5 Rotating the transmitter on the sensor (optional)................................................................19
2.6 Rotating the display orientation..............................................................................................20
2.7 Rotate the sensor wiring junction box on a remote-mount transmitter (optional)..........21
Chapter 3 Wiring the channels................................................................................................................23
3.1 Installation types for the 4200 transmitter............................................................................23
3.2 Available channels.....................................................................................................................24
3.3 Barriers verified by Micro Motion........................................................................................... 24
3.4 Channel power requirements .................................................................................................25
3.5 Access the wiring channels...................................................................................................... 29
3.6 Wire the Channel A mA HART
®
output................................................................................... 30
3.7 Wire the Channel B mA output................................................................................................31
3.8 Wire Frequency Output/Discrete Output (Channel B).......................................................... 31
3.9 Wire the mA/Safety Integrity Level (SIL) output.................................................................... 32
Chapter 4 Powering up the transmitter.................................................................................................33
Chapter 5 Configuring the transmitter with Guided Setup.................................................................35
Chapter 6 Using the display controls..................................................................................................... 37
6.1 Configure the display backlight...............................................................................................38
Chapter 7 Communicating with the transmitter..................................................................................39
Installation Manual Contents
MMI-20058013 March2024
Installation Manual 3