ER5000 —
230
Internal Variables
78 ID_COMPENSATED_EXTRA_AD2
This input is available only on “F” models. This is the
compensated external analog input value, after linearization
has been applied to the raw signal. A value of 6400 is 0% and
59200 is 100%.
85 ID_AD_EXTRA1_TOGGLE
This variable is used to adjust the level that the ER5000
interprets variable #77 (ID_COMPENSATED_EXTRA_AD1) as
a Logical 0 or a Logical 1.
86 ID_AD_EXTRA2_TOGGLE
This variable is used to adjust the level that the ER5000
interprets variable #78 (ID_COMPENSATED_EXTRA_AD2) as
a Logical 0 or a Logical 1.
ER5000 Pressure Profile Variables
45 ID_PROFILE_LOOP_COUNT
This variable displays the count of times through a Prole
loop. The counter starts at the number of loops entered in
the Number of Loops (0=>forever) eld of the Prole Builder when
the Loop command segment is added to the Prole and
decrements by one at each loop of the count.
69 ID_PROFILE_TYPE
This is the type of the prole step currently active.
• 0 => STOP
• 1 => RAMP
• 2 => STEP
• 3 => DWELL
• 4 => DIGITAL OUTPUT
• 5 => DIGITAL INPUT
• 6 => LOOP
• 7 => CHANGE VARIABLE
• 8 => Delta
• 9 => If
• 10 => GoTo
• 11 => Soak
To Next Page
Loading...
Need help?
General
