Epilog Laser Fusion Pro 48 User Manual

The standard reference for laser safety is the American Standard for the Safe Use of Lasers, Z136.1-2000,
developed by the American National Standards Institute (ANSI). This reference is the basis for many of
the federal regulations for laser and laser system manufacturers, and for the Occupational Safety and
Health Administration (OSHA) laser safety guidelines. It contains detailed information concerning proper
installation and use of laser systems.
While the ANSI standard itself does not have the force of law, its recommendations, including warning
signage, training, and the designation of a laser safety oicer, may be compulsory under local workplace
regulations when operating laser systems above Class I. It is the operator’s responsibility to ensure that
the installation and operation of the Epilog Model 16000 Laser System is peormed in accordance with
all applicable laws.
Copies of ANSI Standard Z136.1-2000 are available from Epilog Corporation or from:
Laser Institute of America
12424 Research Parkway, Suite 125
Orlando, FL 32826
(407) 380-1553
Electrical Safety
The AC input power to the Epilog Model 16000 Laser System is potentially lethal and is fully contained
within the cabinet.
• DO NOT open any of the machine’s access panels while the unit is plugged in.
Opening a panel may expose the operator to the unit’s AC input power.
• DO NOT make or break any electrical connections to the system while the unit is
turned on.
Fusion Pro Electrical Specifications
Model Wattage(s) Voltage Amp draw-MAX
Pro 32 50, 60, 80 120 13A
Pro 32 50, 60, 80 240 6.5A
Pro 32 120 240 10A
Pro 48 50, 60, 80 240 6.5A
Pro 48 120 240 10A
- 4 -
SECTION 1: SAFETY

Epilog Laser Fusion Pro 48 Specifications

General

Brand	Epilog Laser
Model	Fusion Pro 48
Category	Engraver
Language	English