Epilog Laser Fusion Pro 48 User Manual

- 14 -
SECTION 2: GETTING STARTED
2. Remove the top lid and set it to the side.
Keep it accessible for a future step.
3. Remove the screws securing the front panel.
1. Unpacking the Laser
System
Unpack the laser system from the crate
provided by Epilog. Please be sure to
hold on to all packing materials and
crating in case you need to move the
system in the future.
Start by using scissors or a utility knife to cut the
box straps. Stand clear of the straps, as they
are under high tension and may pop out at high
speed when cut. On top of the crate will be a box
containing accessories for your Fusion Pro. Set it
to the side for now.
1. Remove the screws securing the top lid using
a screwdriver or a power drill.

Epilog Laser Fusion Pro 48 Specifications

General

Brand	Epilog Laser
Model	Fusion Pro 48
Category	Engraver
Language	English