Changing the aspect ratio for computer images (EB-X10/S10/X9/S9/X92/S92)
When projecting images from the computer, you can change the aspect ratio as follows.
Aspect Mode Operation Projection example
Normal
Displayed when the source is a computer.
Projects to the full projection size retaining the aspect ratio of
the input image.
Auto (EB-X10 only)
Displayed only when the source is
HDMI.
Projects in an appropriate aspect ratio based on information
from the signal being input.
4:3
Projects to the full projection size at an aspect ratio of 4:3.
This is ideal for when you want to project images at an aspect
ratio of 5:4 (1280 x 1024) to the full projection size.
When a 1280x1024 signal is input
16:9
Projects at a 16:9 aspect ratio. This is ideal for projecting at
full screen size when using a 16:9 screen.
When a 1280x1024 signal is input
q
If parts of the image are missing, set Wide or Normal in Resolution from the Configuration Menu depending on the size of the computer panel.
s p.50
Functions for Enhancing Projection
29
To Next Page
Loading...
Need help?
General
