Settings Menu
EB-W10/X10 EB-W9/X9/X92 EB-S10/S9/S92
Sub Menu Function
Keystone
You can correct keystone distortion in the vertical directions. s Quick Start Guide
Auto Keystone
(EB-W10/X10 only)
Turn On to perform Auto Keystone.
(Auto Keystone is only executed when Front is selected from the Extended - Projection menu.)
Zoom
(EB-S10/S9/S92 only)
You can adjust the projection screen size to Wide (Large) or Tele (Small).
Control Panel Lock
You can use this to restrict operation of the projector's Control panel. s p.39
Pointer Shape
You can select the shape of the pointer. s p.32
Pointer 1:
Pointer 2: Pointer 3:
Power Consumption
You can set the Lamp brightness to one of two settings.
Select ECO if the images being projected are too bright such as when projecting images in a dark room or onto a small screen. When ECO is selected, the
amount of electricity consumed and the lamp's operating life are changed as follows, and fan rotation noise during projection is reduced. Electrical
consumption: about 7 to 19% decrease, lamp life: about 1.3 times longer
Volume
You can adjust the Volume. Setting details are saved for each Source and Signal Status.
User Button
You can select the item assigned from the Configuration menu with the remote control's [User] button. By pressing the [User] button the assigned menu
item selection/adjustment screen is displayed, allowing you to make one-touch settings/adjustments. You can assign one of the following items to the
[User] button.
Power Consumption, Info, Progressive, Resolution
List of Functions
52
To Next Page
Loading...
Need help?
General
