When the Indicators Provide No Help
If any of the following problems occur and the indicators do not offer a
solution, refer to the pages given for each problem.
Problems relating to projection
• "The projector does not turn on" s p.63
• "No images appear" s p.63
Projection does not start, the projection area is completely black, the
projection area is completely blue, and so on.
• "Moving images are not displayed (moving image sections are
black)" s p.64
Moving images being projected from a computer appear black and nothing
is projected.
• "Projection stops automatically" s p.64
• ""Not supported. " is displayed" s p.64
• ""No Signal. " is displayed" s p.64
• "Images are fuzzy or out of focus" s p.65
• "Interference or distortion appear in images" s p.65
• "The image is truncated (large) or small, or the aspect ratio is not
suitable" s p.66
Only part of the image is displayed, or the height and width ratios of the
image are not correct, and so on.
• "Image colors are not right" s p.66
The whole image appears purplish or greenish, images are black & white,
colors appear dull, and so on... (Computer monitors and LCD screens have
different color reproduction performance, so that the colors projected by the
projector and the colors appearing on the monitor may not necessarily
match, but this is not a sign of a problem.)
• "Images appear dark" s p.67
Problems relating to USB Display
• "No images appear" s p.68
Nothing is displayed even when the USB cable is connected...
• "A part of the image is not displayed" s p.68
• "The mouse cursor flickers" s p.68
• "Cannot project Windows Media Center" s p.68
Other problems
• "No sound can be heard or the sound is faint"
s
p.69
• "The Remote Control does not work" s p.69
• "I want to change the language for messages and menus" s p.69
Problem Solving
62
To Next Page
Loading...
Need help?
General
