Sub Menu Function
Reset
You can reset all adjustment values on the Settings menu to their default settings, except for User Button.
To return all menu items to their default settings, see s p.56
Extended Menu
Sub Menu Function
Display
You can make settings related to the projector's display.
Messages: When set to Off, the following items will not be displayed. The name of the current selection when changing the Source, Color
Mode or Aspect; a message when no image signal is input; warnings such as the High Temp Warning.
Display Background
*1
: You can set the screen status for when no image signal is available to Black, Blue, or Logo.
Startup Screen
*1
: You can set whether or not (On/Off) the Startup Screen (the image projected when starting the projector) is displayed.
A/V Mute
*1
: You can set the screen displayed during A/V Mute as Black, Blue, or Logo.
User's Logo
*1
You can change the User's Logo that is displayed as a background during Display Background, A/V Mute, and so on. s p.81
Projection
You can set from the following according to the way the projector is setup. s p.71
Front, Front/Ceiling, Rear, Rear/Ceiling
You can change the setting as follows by pressing down the [A/V Mute] button on the Remote Control for about five seconds.
FrontWFront/Ceiling
RearWRear/Ceiling
List of Functions
53
To Next Page
Loading...
Need help?
General
