Image File Display Setting and Slideshow
Operation Setting
You can set the display order of the files and the operation of the Slideshow
in the Option screen.
Procedure
A
Press the [ ], [ ], [ ], and [ ] buttons to set the
cursor to the folder for which you want to set the display
requirements, then press the [Esc] button. Select "Option" from
the displayed sub menu and press the [Enter] button.
B
Set each item in the following Option screen.
Set the cursor to the setting value of the item you want to change,
and press the [Enter] button to make it active.
The following table shows the details of each item.
Display order
Sets the display order of the files. Select from Name order
and Date order, in ascending order.
Continuous
Play
Sets whether or not to repeat the Slideshow.
Screen switch‐
ing time
Sets the display time for each file in a Slideshow playback. Set
to any value from No (0) to 60 seconds. When set to No,
automatic paging is disabled.
Effect
Sets the screen effect to be used when changing slides.
C
Press the [ ], [ ], [ ], and [ ] buttons to set the
cursor on "OK", then press [Enter].
The settings are applied.
If you do not want to apply the settings, set the cursor to Cancel and
press the [Enter] button.
Making a Presentation with a Slideshow (EB-W10/X10 only)
46
To Next Page
Loading...
Need help?
General
