Epson EH-TW5910 User Manual

Useful Functions
42
Enjoying 3D Images
Setting 3D Images
When 3D data is received from the HDMI1, HDMI2, or WirelessHD (EH-TW6100W only) source, the image is
automatically projected in 3D.
The following 3D formats are supported.
•
Frame Packing
•
Side by Side
•
Top and Bottom
a
Connect an AV device capable of
playing 3D images to the projector.
b
Turn on the AV device and the
projector, and then press the
button.
If the 3D image is projected automatically,
you do not need to press any buttons.
If the 3D image cannot be viewed
Check the following if the 3D effect is not displayed correctly, even after switching to 3D mode.
•
Check that the 3D format for the AV device and the 3D Format for the projector match. s Signal - 3D Setup - 3D
Format p.68
See the manual provided with the AV device for more information on making settings for the AV device.
•
The synchronization timing for the 3D Glasses may have been inversed. Inverse the synchronization using Inverse
3D Glasses, and then try again.
s Signal - 3D Setup - Inverse 3D Glasses p.68
•
If a 3D image is not displayed, try switching by pressing the button.
c
•
How a 3D image is perceived varies depending on the individual.
•
The image is not displayed in 3D if 3D Display is set to Off. Press the button on the remote
control.
s Signal - 3D Setup - 3D Display p.68
•
The projector automatically selects the appropriate 3D format, but if the 3D image is not displayed
correctly, use 3D Format to select another format.
s Signal - 3D Setup - 3D Format p.68
•
If the 3D effect is not displayed correctly, try reversing using Inverse 3D Glasses. s Signal - 3D
Setup - Inverse 3D Glasses p.68
•
When a 3D image is displayed, a warning about viewing 3D images is displayed. You can turn off this
warning by setting 3D Viewing Notice to Off.
s Signal - 3D Setup - 3D Viewing Notice p.68
•
You can also convert 2D images to 3D images. s p.48
•
During 3D projection, the following configuration menu functions cannot be changed.
Aspect (set to Normal), Noise Reduction (set to Off), Sharpness, Split Screen, Overscan (set to Off),
Super-resolution
•
How the 3D image is viewed may change depending on the temperature of the surroundings and how
long the lamp has been used. Refrain from using the projector if the image is not projected normally.

Epson EH-TW5910 Specifications

Image

color light output	2, 100 lumen
white light output	2, 100 lumen
resolution	1920 x 1080
contrast ratio	20, 000:1

Optical

projection ratio	1.32 - 2.15:1
projection size	30 inches - 300 inches
projection distance wide	0.9 m - 8.9 m
projection distance tele	1.4 m - 14.5 m

Power

energy use	358 W
economy energy use	274 W
standby energy use	0.35 W

Connectivity

interfaces	RS-232C, VGA in, HDMI 1.4 (2x), Composite in, USB 2.0 Type A, USB 2.0 Type B, Component in
loudspeaker	20 W
stereo	Stereo

Weight and Dimensions

product dimensions	420 x 365 x 137 mm
product weight	6 kg
noise level economy	24 dB (A)