Epson EH-TW5910 User Manual

Introduction
8
Part Names and Functions
Front/Top
Name Function
a
Lamp cover
Open when replacing the projector's lamp. s p.92
b
Air exhaust vent
Exhaust vent for air used to cool the projector internally.
Caution
While projecting, do not put your face or hands near the air exhaust vent,
and do not place objects that may become warped or damaged by heat near
the vent. Hot air from the air exhaust vent could cause burns, warping, or
accidents to occur.
c
Remote receiver
Receives signals from the remote control. s p.21
d
Projector's lens
Images are projected from here.
e
Lens cover
Install when not using the projector to protect the lens from being scratched or
soiled.
s p.22
f
Air intake vent
Intake vent for air used to cool the projector internally.
g
Front adjustable foot
When setup on a surface such as a table, extend the foot to adjust the horizontal
tilt.
s p.26
h
Air filter cover
When cleaning or replacing the air filter, open this cover and remove the air filter.
s p.88, p.91
i
Focus ring
Adjusts the image focus. s p.25
j
Zoom ring
Adjusts the image size. s p.25
k
H-Keystone slider
Performs horizontal keystone correction. s p.26
l
Control panel
Control panel on the projector. s p.9

Epson EH-TW5910 Specifications

Image

color light output	2, 100 lumen
white light output	2, 100 lumen
resolution	1920 x 1080
contrast ratio	20, 000:1

Optical

projection ratio	1.32 - 2.15:1
projection size	30 inches - 300 inches
projection distance wide	0.9 m - 8.9 m
projection distance tele	1.4 m - 14.5 m

Power

energy use	358 W
economy energy use	274 W
standby energy use	0.35 W

Connectivity

interfaces	RS-232C, VGA in, HDMI 1.4 (2x), Composite in, USB 2.0 Type A, USB 2.0 Type B, Component in
loudspeaker	20 W
stereo	Stereo

Weight and Dimensions

product dimensions	420 x 365 x 137 mm
product weight	6 kg
noise level economy	24 dB (A)