Epson EH-TW5910 User Manual

Useful Functions
53
d
If projection does not start, press the button on the remote control to change the
source.
Make sure you point the remote control at the projector when using the button on the remote
control.
Projection starts.
e
When connecting two or more AV devices to the WirelessHD Transmitter, press the
button to switch images. s p.57
c
•
When receiving WirelessHD images, make sure WirelessHD is set to On from the configuration menu.
s Settings - WirelessHD p.71
•
Make sure you turn off the WirelessHD Transmitter if it is not going to be used for an extended period.
WirelessHD Settings Menu
a
Press the button.
The configuration menu is displayed.
b
Select Settings - WirelessHD.
The WirelessHD settings screen is
displayed.
c
Make settings for each of the
displayed functions.
Available functions on the WirelessHD settings menu
Function Explanation
Device Connections Displays a list of available WirelessHD devices that can be connected. The device names
and MAC addresses (device numbers) are displayed in the list. The MAC address is
displayed on the label on the base.
WirelessHD Enables or disables the WirelessHD function.
Reception Displays the reception.
Reset
You can reset all adjustment values for the WirelessHD settings menu to their default
settings.

Epson EH-TW5910 Specifications

Image

color light output	2, 100 lumen
white light output	2, 100 lumen
resolution	1920 x 1080
contrast ratio	20, 000:1

Optical

projection ratio	1.32 - 2.15:1
projection size	30 inches - 300 inches
projection distance wide	0.9 m - 8.9 m
projection distance tele	1.4 m - 14.5 m

Power

energy use	358 W
economy energy use	274 W
standby energy use	0.35 W

Connectivity

interfaces	RS-232C, VGA in, HDMI 1.4 (2x), Composite in, USB 2.0 Type A, USB 2.0 Type B, Component in
loudspeaker	20 W
stereo	Stereo

Weight and Dimensions

product dimensions	420 x 365 x 137 mm
product weight	6 kg
noise level economy	24 dB (A)