Troubleshooting
79
Indicators Status Remedy
(blue)
Projection in pro-
gress
The projector is operating normally.
c
•
Under normal operating conditions, the o and m indicators are off.
•
When the Illumination function is set to Off, all indicators are off under normal projection conditions.
s Extended - Operation - Illumination p.73
When the Indicators Provide No Help
Check the problem
Check the following table to see if your problem is mentioned, and go to the appropriate page for information
on handling the problem.
Problem Page
Problems relating to im-
ages
No images appear.
Projection does not start, the projection area is completely black, or
the projection area is completely blue.
p.80
Moving images being projected from a computer are not projected. p.80
"Not supported" is displayed.
p.81
"No Signal" is displayed.
p.81
Images are fuzzy or out of focus. p.81
Interference or distortion appears in the images. p.82
The image is truncated (large) or small, or only a part of the image is
projected.
p.82
Image colors are not right.
The whole image appears purplish or greenish, images are black &
white, or colors appear dull.
*
p.83
Images appear dark. p.83
Projection stops automatically. p.83
Problems when projection
starts
The projector does not turn on. p.84
Problems with the remote
control
The remote control does not respond. p.84
Problems with 3D Cannot project correctly in 3D. p.85
Problems with HDMI HDMI Link does not function. p.85
The device name is not displayed under device connections. p.86
Problems with WirelessHD Cannot project WirelessHD images. p.86
WirelessHD audio is not output correctly. p.86
Interference or distortion appear in WirelessHD images. p.87
To Next Page
Loading...
Need help?
Image
Power
Weight and Dimensions
