Epson L485 SERIES User Manual

Ink Bottle Codes
Epson recommends the use of genuine Epson ink bottles. Epson warranty does not cover damage caused by inks
other than those specied, including any genuine Epson ink not designed for this printer or any third party ink.
Other products not manufactured by Epson may cause damage that is not covered by Epson's warranties, and
under certain circumstances, may cause erratic printer behavior.
e following are the codes for genuine Epson ink bottles.
BK: Black C: Cyan M: Magenta Y: Yellow
664 664 664 664
c
Important:
Use of genuine Epson ink other than the specied ink could cause damage that is not covered by Epson's warranties.
Note:
❏ Ink bottle codes may vary by location. For the correct codes in your area, contact Epson support.
❏ For users in Europe, visit the following website for information on Epson's ink bottle yields.
http://www.epson.eu/pageyield
Related Information
& “Technical Support Web Site” on page 149
Ink Bottle Handling Precautions
Read the following instructions before relling ink.
Handling precautions
❏ Use ink bottles with the correct part code for this printer.
❏
is
printer requires careful handling of ink. Ink may splatter when the ink tanks are
lled
or
relled
with ink.
If ink gets on your clothes or belongings, it may not come
o.
❏ Store ink bottles at normal room temperature and keep them away from direct sunlight.
❏ Epson recommends using the ink bottle before the date printed on the package.
❏ Store the ink bottles in the same environment as the printer.
❏ When storing or transporting an ink bottle aer removing its seal, do not tilt the bottle and do not subject it to
impacts or temperature changes. Otherwise, ink may leak even if the cap on the ink bottle is tightened securely.
Be sure to keep the ink bottle upright when tightening the cap, and take measures to prevent ink from leaking
when you transport the bottle.
❏
Aer
bringing an ink bottle inside from a cold storage site, allow it to warm up at room temperature for at least
three hours before using it.
❏ Do not open the ink bottle package until you are ready to ll the ink tank. e ink bottle is vacuum packed to
maintain its reliability. If you leave an ink bottle unpacked for a long time before using it, normal printing may
not be possible.
User's Guide
Relling Ink
82

Epson L485 SERIES Specifications

General

Brand	Epson
Model	L485 SERIES
Category	All in One Printer
Language	English