Note:
❏ Ink bottle codes may vary by location. For the correct codes in your area, contact Epson support.
❏ For users in Europe, visit the following website for information on Epson's ink bottle yields.
http://www.epson.eu/pageyield
❏ For users in the U.S., Canada, and Latin America, visit the follwoing website for information on Epson ink bottle yields.
https://www.epson.com/inkinfo (U.S.)
https://www.epson.ca/inkinfo (Canada)
https://www.latin.epson.com/inkinfo (Latin America)
Related Information
& “Technical Support Web Site” on page 129
Ink Bottle Handling Precautions
Read the following instructions before relling ink.
Storing precautions for ink
❏ Keep the ink bottles out of direct sunlight.
❏ Do not store the ink bottles in high or freezing temperatures.
❏ Aer bringing an ink bottle inside from a cold storage site, allow it to warm up at room temperature for at least
three hours before using it.
❏ Once you open an ink bottle, we recommend using it as soon as possible.
❏ To ensure printer quality, use all the ink in the ink tank before the earlier of the following dates.
❏ Expiry date noted on the ink bottle
❏ 25 days
aer
the ink tank was
relled
❏ Do not open the ink bottle package until you are ready to
ll
the ink tank.
e
ink bottle is vacuum packed to
maintain its reliability. If you leave an ink bottle unpacked for a long time before using it, normal printing may
not be possible.
❏ When storing or transporting an ink bottle, do not tilt the bottle and do not subject it to impacts or temperature
changes. Otherwise, ink may leak even if the cap on the ink bottle is tightened securely. Be sure to keep the ink
bottle upright when tightening the cap, and take precautions to prevent ink from leaking when transporting the
bottle, for example, putting the bottle in a bag.
Handling precautions for relling ink
❏ e ink for this printer must be handled carefully. Ink may splatter when the ink tanks are being lled or relled
with ink. If ink gets on your clothes or belongings, it may not come o.
❏ Use ink bottles with the correct part code for this printer.
❏ Do not shake too vigorously or squeeze the ink bottles.
❏ For optimum print results do not maintain low ink levels for extended periods of time.
❏ To obtain optimum printing results, rell the ink tanks to the upper line at least once every year.
User's Guide
Relling Ink and Replacing Maintenance Boxes
70
To Next Page
Loading...
Need help?
General