H
Close the covers on the left and right.
I
Close the printer cover and the maintenance
covers on the left and right.
Post-Move Setup
After moving the printer, follow the steps below to
ready it for use.
A
If you have removed the curing heater, be sure
to see the following to install it correctly.
Check that the new location is appropriate, and
attach the parts that were removed.
Regions other than North America and Latin
America : U Setup Guide (booklet)
If you do not have the Setup Guide on hand,
select and refer to the model of your printer
from http://epson.sn.
North American and Latin American users:
Contact your dealer for product installation.
The product must be installed by an authorized
dealer. Damage to the product from
unauthorized installation will not be covered by
your Epson warranty.
B
Plug in the power cables and turn the printer on.
Regions other than North America and Latin
America:
U Setup Guide (booklet)
North American and Latin American users:
Contact your dealer for product installation.
The product must be installed by an authorized
dealer. Damage to the product from
unauthorized installation will not be covered by
your Epson warranty.
C
Perform a Print Head Nozzle Check to check
for clogged nozzles.
U “How to Print a Nozzle Check Pattern” on
page 95
D
Execute Print Adjustments in the Settings
menu.
U “Optimizing Media Settings (Automatic
Adjustment)” on page 61
Transport
Before transporting the printer, contact your dealer or
Epson Support.
U “Where To Get Help” on page 143
SC-R5000 Series/SC-R5000L Series User's Guide
Appendix
136
To Next Page
General
