When to perform Component to be cleaned
When a cleaning message is displayed on
the control panel screen
(Messages are displayed regularly)
B Around the print head
U “Cleaning Around the Print Head” on page 79
C Flushing pad
U “Cleaning Around the Flushing Pad” on page 84
D Suction Cap
U “Cleaning the Suction Cap” on page 83
E Anti-drying caps
U “Cleaning the anti-drying caps” on page 80
You can check the procedure in a video on YouTube.
Epson Video Manuals
When a cleaning message is displayed on
the control panel screen
(Messages are displayed regularly)
F Media cleaner
U “Cleaning the Media Cleaner” on page 85
c
Important:
The printer contains precision instruments. If any lint or dust adheres to the nozzles on the print head, print
quality will decline.
Perform regular cleaning more frequently depending on the environment and media being used.
Locations of Consumables and Replacement Timing
When to perform Component to be replaced
When the plates are deformed or
damaged.
A Media edge plates
U “Replacing the Media Edge Plates” on page 93
SC-R5000 Series/SC-R5000L Series User's Guide
Maintenance
74
To Next Page
General
