Print Lengths by Pass Number and Creating a Job
Table of Print Lengths by Pass Number
Number of
Passes
Media width
54 Inches or Less Up to 64 Inches
1 pass 253.7 m (832.3 ft.) 228.8 m (750.6 ft.)
4 pass 70.4 m (230.9 ft.) 62.7 m (205.7 ft.)
5 pass 56 m (183.7 ft.) 49.9 m (163.7 ft.)
6 pass 43.1 m (141.4 ft.) 38.5 m (126.3 ft.)
9 pass 31 m (101.7 ft.) 27.7 m (90.9 ft.)
14 pass 19.5 m (64 ft.) 17.4 m (57.1 ft.)
20 pass 13.5 m (44.3 ft.) 12.1 m (39.7 ft.)
26 pass 10.7 m (35.1 ft.) 9.5 m (31.1 ft.)
35 pass 7.8 m (25.6 ft.) 6.9 m (22.6 ft.)
Creating a job
Take one of the following actions if the print length exceeds three hours.
❏ If the result of nesting jobs in RIP or Step and Repeat is over three hours, divide the nested jobs into multiple
jobs within the three hour time window, or set the Layout Area Size in Step and Repeat to a print length
within the table above.
❏ If a single job takes more than three hours, you can split the image into multiple jobs by using the cropping
function.
❏ If a single job takes more than three hours but you do not want to split the image, print in a faster print mode
to finish printing within three hours.
SC-R5000 Series/SC-R5000L Series User's Guide
Appendix
137
To Next Page
Loading...
Need help?
General
