17
Open and Print File
This section describes two different printing methods.
Normally, we recommend to print after checking the print file. When adding margins or performing tiled printing, make
sure to follow the steps below for printing.
"Select Registered Quick Set and Print"
When you do not need to check the print file when printing, the hot folder printing is useful.
"Drag and Drop Files to the Hot Folder"
Select Registered Quick Set and Print
Set the media properly on the printer.
For instructions on setting media, see the "User's Guide" (PDF).
Double-click the RIP Queue icon.
Click in [Current Media and Page Size] on the right of the screen.
Check if the media information set on the printer matches the settings on the screen.
To Next Page
Loading...
Need help?
General