Epson SC-S80600 Series User Manual

E
Lower the tension bar until it slightly touches the
media.
F
Confirm that the media is attached without
looseness.
If the tension on the left and right of the media is
different in the areas shown in the illustration
below, the media will not be taken up correctly.
When one side is loose, restart the procedure
from Step 1.
Note:
You can confirm differences in tension by lightly
tapping both edges of the media as shown in the
illustration below.
G
Continue holding down the d button until the
media has wrapped around once or twice.
Take-up with the Printed Side
Facing In
A
Cut the paper tape approximately 70 cm in
length, and paste it approximately in the center of
the media using commercially available adhesive
tape.
SC-S80600 Series/SC-S80600L Series/SC-S60600 Series/SC-S60600L Series/SC-S40600 Series User's Guide
Basic Operations
41

Epson SC-S80600 Series Specifications

General

Brand	Epson
Model	SC-S80600 Series
Category	Printer
Language	English