Epson SC-S80600 Series User Manual

B
When using the Auto Take-up Reel Unit, raise
the tension bar.
C
Raise the cutter, and then move it so that the
cutter blade fits the cutter grove properly.
If you cannot position your hand correctly due to
the front cover, open the front cover and then
cut.
c
Important:
When you cut the media, check that it does not
rise up inside the front cover or has not come
free from the media edge plate before printing.
D
Set the Auto switch to Off. Take up the cut media
completely by operating the Manual switch
according to how the media is rolled.
Removing Media
Caution:
❏ If the media weighs over 20 kg, it should not be
carried by one person. When loading or
removing the media, use at least two people.
❏ Follow the instructions in the manual when
loading media or roll cores or removing the
take-up roll.
Dropping media, roll cores, or take-up rolls
could result in injury.
A
To prevent the media from sliding off the roll,
support the roll at its left end.
B
Loosen the left roll core holder fixing screw and
remove the roll core holder from the roll.
SC-S80600 Series/SC-S80600L Series/SC-S60600 Series/SC-S60600L Series/SC-S40600 Series User's Guide
Basic Operations
53

Epson SC-S80600 Series Specifications

General

Brand	Epson
Model	SC-S80600 Series
Category	Printer
Language	English